Film blocking control
Anti-Block Additive to Reduce Film-Layer Blocking
SPHERE Anti-Block reduces adhesion between film layers after winding, making rolls easier to open and cutting downstream disruption and waste.
Technical file (TDS / COA / MSDS) on requestTechnical overview
- Category
- Film blocking control
- Family
- Performance Additives
- Available grades
- On request
- Applications
- Blown Film, Sheets and Thermoforming
- How to obtain
- A sample tested on your line before ordering
The problem it addresses
Is film sticking after winding and slowing packing or processing?
Practical benefits
- Helps rolls open more easily
- Reduces disruption in packing or downstream use
- Selection depends on film thickness and winding method
How to know if you need this product
- When layers stick together after winding
- When roll opening takes time or creates waste
Related production problems
Frequently asked questions
Is Anti-block Additive the same as Slip Additive?
No. Anti-block Additive helps reduce film-to-film adhesion and makes film layers easier to separate. Slip Additive reduces surface friction and improves film slip. Some applications may require one or both additives depending on the production issue.
Need the technical file?
Send us the product and your application, and we'll share the right file directly on WhatsApp.
Technical documents are shared directly after contact and are not published publicly.
Test the product on your line first. Then decide.
Direct contact: 01018754332